kaleidoscope::driver::bootloader

We rarely have to work with or care about the bootloader from the user firmware, but there’s one scenario when we do: if we want to reset the device, and put it into bootloader (programmable) mode, we need to do that in a bootloader-specific manner.

This driver provides a number of helpers that implement the reset functionality for various bootloaders.

Using the driver

To use the driver, we need to include the appropriate header, from the hardware plugin of our keyboard:

#include <kaleidoscope/driver/bootloader/avr/Caterina.h>

Next, we set up the device Properties so that it includes the override for our bootloader:

struct OurBoardProps : kaleidoscope::device::BaseProps {
  typedef kaleidoscope::driver::bootloader::avr::Caterina Bootloader;
};

The base classes will do all the rest.

Methods provided by all bootloader drivers

.rebootBootloader()

Resets the device, and forces it into bootloader (programmable) mode.

List of bootloaders

All of the drivers below live below the kaleidoscope::driver::bootloader namespace.

avr::Caterina:

Used by many (most?) arduino MCUs. Provided by kaleidoscope/driver/bootloader/avr/Caterina.h.

avr::HalfKay

Used by the Teensy2. Provided by kaleidoscope/driver/bootloader/avr/HalfKay.h.

avr::FLIP

Used by the ATMega32U4 MCUs by default, unless another bootloader has been flashed on them. Provided by kaleidoscope/driver/bootloader/avr/FLIP.h.

For this driver to work, one also needs to define the KALEIDOSCOPE_BOOTLOADER_FLIP_WORKAROUND macro before including the driver header, for technical reasons.